Roof racks now come in all shapes and sizes. We get lots of questions about roof top tents and one of the most common is “what sort of roof racks do you need for a roof top tent?”
Not hard to see why people love the idea of roof top tents - adventure, fun, freedom, nature, comfort, convenience … awesome!
But then there are some practical things to think about.
A few quick pointers on roof racks.
- Square bars are easier to work with than the oval shaped whisp bars. The width of square bars is narrower and most mounting plates supplied with a tent will fit them. Whisps are wider and not all plates will be suitable for them and you may have to look around for some alternative to the supplied ones. Our Orson roof top tents come with mounting plates that can be used with bars from 4cm up to 8cm in width which should cover most racks on the market.
- You need about 86cm width of clear, clean straight bar to work with. For Orson roof top tents the mounting tracks under the tent are about 80cm apart and you need clear bar to bolt them onto – no plastic mounting fittings underneath or curves in the racks that will get in the way of the plates that will clamp onto the roof racks.
- Check weight ratings on roof racks. A roof tent typically weighs 60+kg so best to get racks that have a load rating of minimum 75kg or 100kg even better. These ratings are for dynamic weights when a vehicle is moving to cope with braking and turning. The static weight on the racks is much higher than the dynamic rating.
- Try to get racks that will leave a reasonable gap between roof and the racks. You have to get your hands in there to fasten/loosen the bolts. More room and better access will make things easier.
- Make sure that the height from ground to the top of the roof racks is within reach of the roof top tent ladder and annex you’re after. Most ladders are around the 2m mark and annexes fit a set up around 2m in height or XL ones around 2.2m. If your racks are set at 2.4m up then something’s gotta give.
- Get advice from a roof rack retailer. They’ll be able to use computer base to find racks that are suitable for your model vehicle and compatible with setting a roof top tent up on top. You can fit a set of racks (and a tent) on most vehicles but you should seek advice and also check the load capacity of your vehicle roof with the manufacturer.
Other options
- Ute back frames – some guys are building racks and frames over the ute trays to sit the tents on. We hope to have a frame that can be fitted to ute backs in the near future.
- Rooftop baskets – need to check that the bars will hold the weight as weren’t really made to take the weight of a tent. And also check that the roof top tent ladder is tall enough with the extra height that baskets add to the set up.
- Roof top platforms – generally these will work fine but the width and direction of the slats used may mean a bit of effort to make sure the roof tent can be secured properly.
- Trailers – some are setting up the roof tents on a trailer. Gear underneath, frame and bars with roof tent and then using removable H bars over the packed tent to carry kayaks etc.
- Awnings – vehicle awnings are a cool and easy way to add a massive living area to add to your bedroom upstairs. You might want to think about a roof rack that can handle both a tent and an awning.
Post time: Apr-14-2022
